# \#3d-printing

**URL:** https://wargeeks.org/tag/3d-printing/63.md

[Latest](https://wargeeks.org/latest.md) · [Categories](https://wargeeks.org/categories.md) · [Tags](https://wargeeks.org/tags.md)

---

## [Klipper / Moonraker & Tuya smart plugs](https://wargeeks.org/t/klipper-moonraker-tuya-smart-plugs/945)

<div class="topic-metadata">

**Author:** [@teejo](https://wargeeks.org/u/teejo)\
**Replies:** 2\
**Last updated:** [April 26, 2023, 7:11am UTC](https://wargeeks.org/t/klipper-moonraker-tuya-smart-plugs/945 "2023-04-26T07:11:21Z")

</div>

So with everything I’m doing with my 3D printer, I thought it would be a nice idea to get some smart plugs to integrate with Moonraker so that I can remotely control the printer’s power, and also a light when it eventual…

---

## [And so it goes on](https://wargeeks.org/t/and-so-it-goes-on/944)

<div class="topic-metadata">

**Author:** [@teejo](https://wargeeks.org/u/teejo)\
**Replies:** 0\
**Last updated:** [April 14, 2023, 8:23am UTC](https://wargeeks.org/t/and-so-it-goes-on/944 "2023-04-14T08:23:58Z")

</div>

I didn’t mention it in my previous post, but I also got a comgrow enclosure for the printer. It has stablized the prints somewhat since the temperature in the enclosure remains somewhat constant, and the printer doesn’t …

---

## [Ordered some more parts](https://wargeeks.org/t/ordered-some-more-parts/934)

<div class="topic-metadata">

**Author:** [@teejo](https://wargeeks.org/u/teejo)\
**Replies:** 5\
**Last updated:** [April 8, 2023, 3:53am UTC](https://wargeeks.org/t/ordered-some-more-parts/934 "2023-04-08T03:53:45Z")

</div>

(This will probably be gibberish if you don’t under stand 3d-printlish) While I’m generally happy with my 3d printer, I’m still having issues with it jamming the filament after a number of hours of printing - probably h…

---

## [Klipper!](https://wargeeks.org/t/klipper/943)

<div class="topic-metadata">

**Author:** [@teejo](https://wargeeks.org/u/teejo)\
**Replies:** 0\
**Last updated:** [April 5, 2023, 12:53am UTC](https://wargeeks.org/t/klipper/943 "2023-04-05T00:53:17Z")

</div>

You will notice clickable ellipses in the text. Those are footnotes. They look quite different in the actual post compared to what you see in the preview when you write a post. I’ve just switched to using Klipper firmwa…

---

## [Finally happy with my 3d printer](https://wargeeks.org/t/finally-happy-with-my-3d-printer/921)

<div class="topic-metadata">

**Author:** [@teejo](https://wargeeks.org/u/teejo)\
**Replies:** 7\
**Last updated:** [June 3, 2022, 8:13am UTC](https://wargeeks.org/t/finally-happy-with-my-3d-printer/921 "2022-06-03T08:13:23Z")

</div>

I got a Creality CR6-SE near the end of last year. Before even starting to properly use the printer, I installed the community firmware, which is a damned sight better than stock (apparently). I like it, anyway. I mana…

---

## [CAD for 3D Printing](https://wargeeks.org/t/cad-for-3d-printing/920)

<div class="topic-metadata">

**Author:** [@teejo](https://wargeeks.org/u/teejo)\
**Replies:** 3\
**Last updated:** [May 10, 2022, 9:25am UTC](https://wargeeks.org/t/cad-for-3d-printing/920 "2022-05-10T09:25:12Z")

</div>

What CAD software do you guys use when you need to create your own designs? I’ve tried TinkerCAD. While I could do what I needed, I was wondering what was better.