Since we don’t have a dedicated thread for them. I found this article interesting:
1 Like
Turn a raspberry pi 2 into a cheap DIY steambox for in-home streaming
http://za.rs-online.com/web/p/processor-microcontroller-development-kits/8968660/ (freakin exchange rate)
Ps. I have had issues with the Pi2 RCA video outputs to an old legacy screen. Any thoughts (excluding sarcasm about replace that screen 
) and have googled like craz-e
Are you positive that the RCA cable is correct?
Oh cool thanks i’ll have a look later.
I just assumed the cable that shipped standard with the Pi2 would have work…
Well if it shipped with the pi then it should work, however check it anyway.
I like pie.
especially if the pi are square 
1 Like
You pi-boys might like this:
I have the Pi Model B… i think it’s time for an upgrade.
Apparently the RPI3 can be used perfectly as a steam streaming box!
Couch “The crew” anyone ?
Here’s the official Amazon way to do the Pi Alexa Voice Service
okay, this is hilarious. I managed to remember to take the multi-meter home.
Turned out it was the right cable, the plastic housing that came with from RS didn’t
allow the 4 way connector to go in all the way and video is the pin furthest from the socket inlet. 
1 Like
RS have this little laptop case where you can use a Rpi. The only problem I see is the price. It’s R4583,76 WITHOUT an rpi. You can just go and buy an i3 entry level laptop for 5k then.
http://za.rs-online.com/web/p/processor-microcontroller-development-kits/1025775/
pi-top Kit Contents
•13.3 inch HD LCD Screen with eDP interface with 1366 x 768 resolution
•Smart battery with 10+ hours run time, 2-Wire SMBus V 2.0 interface
•Keyboard (fully programmable) and trackpad
•8 GB SD card with pre-installed pi-top OS
•WiFi dongle
•Power supply
•Acrylic slice
•Image based build manual
It’s amazing what we’re finding to do with the RPi units we have. We’ve got a music server, a print server, plex media centers and a 3d printing hub. Time to stock up on more Pi! 
1 Like
Recalbox supports Atari 2600, Atari 7800, NES, Game Boy, Game Boy color, Game Boy Advance, Super Nintendo, Famicom Disk System, Master System, Megadrive (Genesis), Gamegear, Game and Watch, Lynx, NeoGeo, NeoGeo Pocket, FBA (subset), iMame4all (subset), PCEngine, Supergrafx, MSX1/2, PSX, Sega Cd, Sega 32X, Sega SG1000, Playstation, ScummVM, Vectrex, VirtualBoy, Wonderswan
Kodi and Recalbox can update in standalone without breaking the dual boot.
Setup was easy, adding roms is tricky at first, using a logitech rumblepad only still tricky cause no popup keyboard and i don’t have a spare USB k/b lying around plus i have a Pie2 so USB ports and all full (wifi,bluetooth,rumblepad,mouse) and sadly kodi doesn’t support rumblepad apparently due to the lack of x.org on JEOS
1 Like
I want to build a small plex system for the kids rooms. Forking out R2000+ on media players is nonsense. Looking at something like an RPI or something cheaper. It just needs to run plex @ 1080p without transcoding. (via AC wifi)
Plex server or client?
1 Like
Cheapest plex client - with some kind of remote
Hmm, I already have the model B which is currently just running pi-hole, not sure if it’s fast enough to run rasplex. Will have to test tonight.
If it works on a pi zero that would be amazing as it’s only R80. (excluding IR module and remote)
With this remote maybe? https://www.pishop.co.za/store/wireless-usb-pc-ir-remote-controller?keyword=remote&category_id=0
Okay so i loaded raspex onto my Model B and it works nicely, boots fast, interface is snappy, sign in to plex and uses the tv remote via cec-hdmi!
Only one problem, my library is not showing up. Bleh.
Plex server - 1.5.5.3634
Here’s the logs that I got from rasplex
[code]Paste output
======== /flash/config.txt ==============
################################################################################
This file is part of LibreELEC - http://www.libreelec.tv
Copyright © 2016 Team LibreELEC
LibreELEC is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
LibreELEC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with LibreELEC. If not, see http://www.gnu.org/licenses/.
################################################################################
Bootloader configuration - config.txt
################################################################################
################################################################################
Memory (System/GPU configuration )
################################################################################
Default GPU memory split (do not change if you do not know what you are doing)
gpu_mem=200
Configure GPU memory based on SDRAM size - overrides above setting
gpu_mem_256=112
gpu_mem_512=200
gpu_mem_1024=256
################################################################################
For overclocking and various other settings, see:
https://www.raspberrypi.org/documentation/configuration/config-txt.md
################################################################################
Overclock mode settings.
default recommended values are: arm_freq | core_freq | sdram_freq | over_voltage
no overclocking : 700 | 250 | 400 | 0
mode ‘Modest’ : 800 | 300 | 400 | 0
mode ‘Medium’ : 900 | 333 | 450 | 2
mode ‘High’ : 950 | 450 | 450 | 6
mode ‘Turbo’ : 1000 | 500 | 600 | 6
arm_freq=950
core_freq=450
sdram_freq=450
over_voltage=4
Set ‘force_turbo=1’ to disable dynamic overclocking and enable overclocking always.
force_turbo=0
If you have any data corruption using Turbo Mode and overclocking
try with this setting uncommented
If this still fails, try to use Medium mode without “over_voltage=2”
If it ultimately keeps failing, forget about this until it gets fixed
Use a more conservative mode that will works fine in any cases:
initial_turbo=30
Make display smaller to stop text spilling off the screen
Note that the overscan settings only affect the splash screen and not Kodi.
If you experience overscan/underscan issues the best solution is to adjust
your TV settings (“full pixel”, “1-1 pixel” etc.). Alternatively, there is a
calibration menu in the Kodi GUI.
disable_overscan=1
Adapt overscan values to your needs
overscan_left=57
overscan_right=59
overscan_top=20
overscan_bottom=20
Uncomment for DVI monitor
hdmi_drive=1
Force HDMI even if unplugged or powered off
hdmi_force_hotplug=1
Doesn’t sent initial active source message.
Avoids bringing CEC (enabled TV) out of standby and channel switch when
rebooting.
hdmi_ignore_cec_init=1
################################################################################
License keys to enable GPU hardware decoding for various codecs
to obtain keys visit the shop at http://www.raspberrypi.com
################################################################################
decode_MPG2=0x00000000
decode_WVC1=0x00000000
################################################################################
>>>>>>>> RasPlex default settings override <<<<<<<<<
################################################################################
Required overlay for LIRC to function
dtoverlay=lirc-rpi
Required for hyperion / lightberry
dtparam=spi=on
Uncomment to enable the sdhost driver
dtoverlay=sdhost
Uncomment to enable HiFiBerry overlay
NOTE: You must disable the lirc-rpi overlay (or change lirc GPIO pin) for HiFiBerry to work correctly
dtoverlay=hifiberry-amp
dtoverlay=hifiberry-dac
dtoverlay=hifiberry-dacplus
dtoverlay=hifiberry-digi
################################################################################
End of default configuration
################################################################################
################################################################################
Include distribution specific config file if it exists.
################################################################################
[all]
include distroconfig.txt
======== /flash/cmdline.txt ==============
boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet
======== /storage/.plexht/temp/plexhometheater.log ==============
01:23:10 T:1962705456 NOTICE: -----------------------------------------------------------------------
01:23:10 T:1962705456 NOTICE: Starting RasPlex (1.8.0.148-573b6d73). Platform: Linux ARM 32-bit
01:23:10 T:1962705456 NOTICE: Using Release RasPlex x32 build (version for Raspberry Pi)
01:23:10 T:1962705456 NOTICE: RasPlex compiled Mar 17 2017 by GCC 6.3.0 for Linux ARM 32-bit version 4.9.13 (264461)
01:23:10 T:1962705456 NOTICE: Running on RasPlex (official) - Version: 1.8.0.148-573b6d73, kernel: Linux ARM 32-bit version 4.9.13
01:23:10 T:1962705456 NOTICE: Host CPU: ARMv6-compatible processor rev 7 (v6l), 1 core available
01:23:10 T:1962705456 NOTICE: ARM Features: Neon disabled
01:23:10 T:1962705456 NOTICE: special://xbmc/ is mapped to: /usr/share/XBMC
01:23:10 T:1962705456 NOTICE: special://xbmcbin/ is mapped to: /usr/lib/plexht
01:23:10 T:1962705456 NOTICE: special://masterprofile/ is mapped to: /storage/.plexht/userdata
01:23:10 T:1962705456 NOTICE: special://home/ is mapped to: /storage/.plexht
01:23:10 T:1962705456 NOTICE: special://temp/ is mapped to: /storage/.plexht/temp
01:23:10 T:1962705456 NOTICE: The executable running is: /usr/lib/plexht/plexhometheater
01:23:10 T:1962705456 NOTICE: Local hostname: RasPlex
01:23:10 T:1962705456 NOTICE: Log File is located: /storage/.plexht/temp/plexhometheater.log
01:23:10 T:1962705456 NOTICE: -----------------------------------------------------------------------
01:23:10 T:1962705456 ERROR: DBus: Error org.freedesktop.DBus.Error.ServiceUnknown - The name org.freedesktop.UPower was not provided by any .service files
01:23:11 T:1962705456 NOTICE: load settings…
01:23:11 T:1962705456 NOTICE: Found 2 Lists of Devices
01:23:11 T:1962705456 NOTICE: Enumerated PI devices:
01:23:11 T:1962705456 NOTICE: Device 1
01:23:11 T:1962705456 NOTICE: m_deviceName : HDMI
01:23:11 T:1962705456 NOTICE: m_displayName : HDMI
01:23:11 T:1962705456 NOTICE: m_displayNameExtra:
01:23:11 T:1962705456 NOTICE: m_deviceType : AE_DEVTYPE_HDMI
01:23:11 T:1962705456 NOTICE: m_channels : FL,FR
01:23:11 T:1962705456 NOTICE: m_sampleRates : 8000,11025,16000,22050,24000,32000,44100,48000,88200,96000,176400,192000
01:23:11 T:1962705456 NOTICE: m_dataFormats : AE_FMT_FLOAT,AE_FMT_S32NE,AE_FMT_S16NE,AE_FMT_S32LE,AE_FMT_S16LE,AE_FMT_FLOATP,AE_FMT_S32NEP,AE_FMT_S16NEP,AE_FMT_AC3,AE_FMT_DTS,AE_FMT_EAC3
01:23:11 T:1962705456 NOTICE: Device 2
01:23:11 T:1962705456 NOTICE: m_deviceName : Analogue
01:23:11 T:1962705456 NOTICE: m_displayName : Analogue
01:23:11 T:1962705456 NOTICE: m_displayNameExtra:
01:23:11 T:1962705456 NOTICE: m_deviceType : AE_DEVTYPE_PCM
01:23:11 T:1962705456 NOTICE: m_channels : FL,FR
01:23:11 T:1962705456 NOTICE: m_sampleRates : 48000
01:23:11 T:1962705456 NOTICE: m_dataFormats : AE_FMT_FLOAT,AE_FMT_S32LE,AE_FMT_S16LE,AE_FMT_FLOATP,AE_FMT_S32NEP,AE_FMT_S16NEP
01:23:11 T:1962705456 NOTICE: Device 3
01:23:11 T:1962705456 NOTICE: m_deviceName : Both
01:23:11 T:1962705456 NOTICE: m_displayName : HDMI and Analogue
01:23:11 T:1962705456 NOTICE: m_displayNameExtra:
01:23:11 T:1962705456 NOTICE: m_deviceType : AE_DEVTYPE_PCM
01:23:11 T:1962705456 NOTICE: m_channels : FL,FR
01:23:11 T:1962705456 NOTICE: m_sampleRates : 48000
01:23:11 T:1962705456 NOTICE: m_dataFormats : AE_FMT_FLOAT,AE_FMT_S32LE,AE_FMT_S16LE,AE_FMT_FLOATP,AE_FMT_S32NEP,AE_FMT_S16NEP
01:23:11 T:1962705456 NOTICE: Enumerated PULSE devices:
01:23:11 T:1962705456 NOTICE: Device 1
01:23:11 T:1962705456 NOTICE: m_deviceName : Default
01:23:11 T:1962705456 NOTICE: m_displayName : Bluetooth
01:23:11 T:1962705456 NOTICE: m_displayNameExtra:
01:23:11 T:1962705456 NOTICE: m_deviceType : AE_DEVTYPE_PCM
01:23:11 T:1962705456 NOTICE: m_channels : FL,FR
01:23:11 T:1962705456 NOTICE: m_sampleRates : 5512,8000,11025,16000,22050,32000,44100,48000,64000,88200,96000,176400,192000,384000
01:23:11 T:1962705456 NOTICE: m_dataFormats : AE_FMT_U8,AE_FMT_S16NE,AE_FMT_S24NE3,AE_FMT_S24NE4,AE_FMT_S32NE,AE_FMT_FLOAT
01:23:11 T:1962705456 NOTICE: special://profile/ is mapped to: special://masterprofile/
01:23:11 T:1962705456 NOTICE: loading special://masterprofile/guisettings.xml
01:23:11 T:1962705456 NOTICE: Getting hardware information now…
03:23:11 T:1962705456 NOTICE: Loading player core factory settings from special://xbmc/system/playercorefactory.xml.
03:23:11 T:1962705456 NOTICE: Loaded playercorefactory configuration
03:23:11 T:1962705456 NOTICE: Loading player core factory settings from special://masterprofile/playercorefactory.xml.
03:23:11 T:1962705456 NOTICE: special://masterprofile/playercorefactory.xml does not exist. Skipping.
03:23:11 T:1962705456 NOTICE: Loaded settings file from special://xbmc/system/advancedsettings.xml
03:23:11 T:1962705456 NOTICE: Contents of special://xbmc/system/advancedsettings.xml are…
<?xml version="1.0" encoding="UTF-8" ?>
false
1
720
540
false
750
30
30242880
30
4.0
3
0
03:23:11 T:1962705456 NOTICE: Getting hardware information now…
03:23:11 T:1962705456 NOTICE: No settings file to load (special://masterprofile/advancedsettings.xml)
03:23:11 T:1962705456 NOTICE: Default DVD Player: dvdplayer
03:23:11 T:1962705456 NOTICE: Default Video Player: dvdplayer
03:23:11 T:1962705456 NOTICE: Default Audio Player: paplayer
03:23:11 T:1962705456 NOTICE: Disabled debug logging due to GUI setting. Level 0.
03:23:11 T:1962705456 NOTICE: Log level changed to 0
03:23:11 T:1962705456 NOTICE: Loading media sources from special://masterprofile/sources.xml
03:23:11 T:1962705456 NOTICE: Running database version Addons15
03:23:11 T:1962705456 NOTICE: Running database version PlexServerCache4
03:23:11 T:1962705456 NOTICE: Raspberry PI firmware version: Mar 2 2017 15:37:10
Copyright © 2012 Broadcom
version a867bcec14cd829107be1c03c0953a076919f4d7 (clean) (release)
03:23:11 T:1962705456 NOTICE: ARM mem: 312MB GPU mem: 200MB MPG2:0 WVC1:0
03:23:11 T:1962705456 NOTICE: cacheMemBufferSize: 28MB
03:23:11 T:1962705456 NOTICE: Config:
arm_freq=950
audio_pwm_mode=1
config_hdmi_boost=2
core_freq=450
disable_auto_turbo=1
disable_commandline_tags=2
enable_uart=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
hdmi_channel_map=8
hdmi_force_cec_address=65535
hdmi_force_hotplug=1
ignore_lcd=1
init_uart_clock=0x2dc6c00
over_voltage=4
overscan_bottom=48
overscan_left=48
overscan_right=48
overscan_top=48
pause_burst_frames=1
program_serial_random=1
sdram_freq=450
temp_limit=85
03:23:11 T:1962705456 NOTICE: Config:
device_tree=-
03:23:11 T:1962705456 NOTICE: InitWindowSystem: Using EGL Implementation: raspberrypi
03:23:11 T:1962705456 NOTICE: Found resolution 640 x 480 for display 0 with 640 x 480 @ 60.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 640 x 480 for display 0 with 640 x 480 @ 59.940063 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 640 x 480 for display 0 with 640 x 480 @ 72.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 640 x 480 for display 0 with 640 x 480 @ 71.928070 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 640 x 480 for display 0 with 640 x 480 @ 75.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 800 x 600 for display 0 with 800 x 600 @ 60.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 800 x 600 for display 0 with 800 x 600 @ 59.940063 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 800 x 600 for display 0 with 800 x 600 @ 72.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 800 x 600 for display 0 with 800 x 600 @ 71.928070 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 800 x 600 for display 0 with 800 x 600 @ 75.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1024 x 768 for display 0 with 1024 x 768 @ 60.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1024 x 768 for display 0 with 1024 x 768 @ 59.940063 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1024 x 768 for display 0 with 1024 x 768 @ 70.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1024 x 768 for display 0 with 1024 x 768 @ 75.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1152 x 864 for display 0 with 1152 x 864 @ 75.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1280 x 800 for display 0 with 1280 x 800 @ 60.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1280 x 800 for display 0 with 1280 x 800 @ 59.940063 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1280 x 1024 for display 0 with 1280 x 1024 @ 60.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1280 x 1024 for display 0 with 1280 x 1024 @ 59.940063 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1280 x 1024 for display 0 with 1280 x 1024 @ 75.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1440 x 900 for display 0 with 1440 x 900 @ 60.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1440 x 900 for display 0 with 1440 x 900 @ 59.940063 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1680 x 1050 for display 0 with 1680 x 1050 @ 60.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1680 x 1050 for display 0 with 1680 x 1050 @ 59.940063 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1366 x 768 for display 0 with 1366 x 768 @ 60.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1366 x 768 for display 0 with 1366 x 768 @ 59.940063 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1600 x 900 for display 0 with 1600 x 900 @ 60.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1600 x 900 for display 0 with 1600 x 900 @ 59.940063 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1280 x 720 for display 0 with 1280 x 720 @ 60.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1280 x 720 for display 0 with 1280 x 720 @ 59.940063 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 720 x 480 for display 0 with 720 x 480 @ 60.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 720 x 480 for display 0 with 720 x 480 @ 59.940063 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 60.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 59.940063 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 720 x 576 for display 0 with 720 x 576 @ 50.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1280 x 720 for display 0 with 1280 x 720 @ 50.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 50.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 24.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 23.976025 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 25.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 30.000000 Hz
03:23:11 T:1962705456 NOTICE: Found resolution 1920 x 1080 for display 0 with 1920 x 1080 @ 29.970032 Hz
03:23:11 T:1962705456 NOTICE: Found (1920x1080@60.000000) at 48, setting to RES_DESKTOP at 16
03:23:11 T:1962705456 NOTICE: Checking resolution 16
03:23:11 T:1962705456 NOTICE: GL_VENDOR = Broadcom
03:23:11 T:1962705456 NOTICE: GL_RENDERER = VideoCore IV HW
03:23:11 T:1962705456 NOTICE: GL_VERSION = OpenGL ES 2.0
03:23:11 T:1962705456 NOTICE: GL_SHADING_LANGUAGE_VERSION = OpenGL ES GLSL ES 1.00
03:23:11 T:1962705456 NOTICE: GL_EXTENSIONS = GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_texture_npot GL_OES_depth24 GL_OES_vertex_half_float GL_OES_EGL_image GL_OES_EGL_image_external GL_EXT_discard_framebuffer GL_OES_rgb8_rgba8 GL_OES_depth32 GL_OES_mapbuffer GL_EXT_texture_format_BGRA8888 GL_APPLE_rgb_422 GL_EXT_debug_marker
03:23:14 T:1962705456 NOTICE: Register - new cec device registered on cec->RPI: CEC Adapter (2708:1001)
03:23:14 T:1962705456 NOTICE: Running database version Addons15
03:23:14 T:1962705456 NOTICE: Running database version PlexServerCache4
03:23:14 T:1962705456 NOTICE: Running database version ViewModes4
03:23:14 T:1962705456 NOTICE: Running database version Textures13
03:23:14 T:1962705456 NOTICE: Running database version MyMusic32
03:23:14 T:1962705456 NOTICE: Running database version MyVideos75
03:23:14 T:1962705456 NOTICE: Running database version TV22
03:23:14 T:1962705456 NOTICE: Running database version Epg7
03:23:14 T:1962705456 NOTICE: initializing playlistplayer
03:23:14 T:1962705456 NOTICE: DONE initializing playlistplayer
03:23:14 T:1747858400 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
03:23:14 T:1747858400 ERROR: CCurlFile::Open failed with code 0 for https://41-150-17-85.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
03:23:15 T:1798190048 ERROR: CCurlFile::Open failed with code 401 for https://192-168-0-3.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/
03:23:15 T:1756247008 ERROR: CCurlFile::Open failed with code 401 for https://192-168-0-3.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
03:23:18 T:1679803360 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
03:23:18 T:1679803360 ERROR: CCurlFile::Open failed with code 0 for https://41-150-17-85.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
03:23:18 T:1747858400 ERROR: CCurlFile::Open failed with code 401 for https://192-168-0-3.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
03:23:18 T:1806578656 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
03:23:18 T:1806578656 ERROR: CCurlFile::Open failed with code 0 for https://41-150-17-85.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
03:23:19 T:1747858400 ERROR: CCurlFile::Open failed with code 401 for https://192-168-0-3.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
03:23:20 T:1671414752 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
03:23:20 T:1671414752 ERROR: CCurlFile::Open failed with code 0 for https://41-150-17-85.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
03:23:20 T:1806578656 ERROR: CCurlFile::Open failed with code 401 for https://192-168-0-3.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
03:23:20 T:1679803360 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
03:23:20 T:1679803360 ERROR: CCurlFile::Open failed with code 0 for https://41-150-17-85.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
03:23:21 T:1806578656 ERROR: CCurlFile::Open failed with code 401 for https://192-168-0-3.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
03:23:33 T:1962705456 ERROR: Control 3 in window 12999 has been asked to focus, but it can’t
03:23:33 T:1962705456 NOTICE: initialize done
03:23:33 T:1962705456 NOTICE: Running the application…
03:23:33 T:1806578656 NOTICE: -->Python Interpreter Initialized<–
03:23:33 T:1962705456 NOTICE: Webserver: Starting…
03:23:33 T:1962705456 NOTICE: WebServer: Started the webserver
03:23:33 T:1764635616 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
03:23:33 T:1764635616 ERROR: CCurlFile::Open failed with code 0 for http://127.0.0.1:32400/library/arts?sort=random&X-Plex-Container-Size=50&X-Plex-Container-Start=0
03:23:33 T:1962705456 NOTICE: ES: Starting event server
03:23:33 T:1962705456 NOTICE: starting zeroconf publishing
03:23:33 T:1614746592 NOTICE: ES: Starting UDP Event server on 0.0.0.0:9777
03:23:33 T:1614746592 NOTICE: UDP: Listening on port 9777
03:23:34 T:1764635616 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
03:23:34 T:1764635616 ERROR: CCurlFile::Open failed with code 0 for http://127.0.0.1:32400/library/arts?sort=random&X-Plex-Container-Size=50&X-Plex-Container-Start=0
03:23:35 T:1671414752 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
03:23:35 T:1671414752 ERROR: CCurlFile::Open failed with code 0 for http://127.0.0.1:32400/:/resources/show-fanart.jpg
03:23:35 T:1671414752 ERROR: CPlexTextureCacheJob::CacheTexture unable to open input file plexserver://local/:/resources/show-fanart.jpg
03:23:35 T:1671414752 ERROR: CGUILargeTextureManager::DoWork could not load image from cache, killing the cached version
03:23:35 T:1671414752 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
03:23:35 T:1671414752 ERROR: CCurlFile::Open failed with code 0 for http://127.0.0.1:32400/:/resources/show-fanart.jpg
03:23:35 T:1671414752 ERROR: CPlexTextureCacheJob::CacheTexture unable to open input file plexserver://local/:/resources/show-fanart.jpg
03:23:35 T:1671414752 ERROR: CGUILargeTextureManager::DoWork could not load image from cache, killing the cached version
03:23:35 T:1671414752 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
03:23:35 T:1671414752 ERROR: CCurlFile::Open failed with code 0 for http://127.0.0.1:32400/:/resources/show-fanart.jpg
03:23:35 T:1671414752 ERROR: CPlexTextureCacheJob::CacheTexture unable to open input file plexserver://local/:/resources/show-fanart.jpg
03:23:35 T:1671414752 ERROR: CGUILargeTextureManager::DoWork could not load image from cache, killing the cached version
03:23:35 T:1671414752 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
03:23:35 T:1671414752 ERROR: CCurlFile::Open failed with code 0 for http://127.0.0.1:32400/:/resources/show-fanart.jpg
03:23:35 T:1671414752 ERROR: CPlexTextureCacheJob::CacheTexture unable to open input file plexserver://local/:/resources/show-fanart.jpg
03:23:35 T:1671414752 ERROR: CGUILargeTextureManager::DoWork could not load image plexserver://local/:/resources/show-fanart.jpg
03:23:37 T:1806578656 NOTICE: ## LibreELEC Addon ## 0.8.9
03:23:37 T:1747858400 WARNING: Read - waited for data but got none
20:40:22 T:1633502176 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
20:40:22 T:1633502176 ERROR: CCurlFile::Open failed with code 0 for https://41-150-17-85.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
20:40:22 T:1798190048 ERROR: CCurlFile::Open failed with code 401 for https://192-168-0-3.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/
20:40:22 T:1641890784 ERROR: CCurlFile::Open failed with code 401 for https://192-168-0-3.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
20:40:22 T:1650279392 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
20:40:22 T:1650279392 ERROR: CCurlFile::Open failed with code 0 for https://41-150-17-85.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
20:40:23 T:1641890784 ERROR: CCurlFile::Open failed with code 401 for https://192-168-0-3.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
20:40:27 T:1650279392 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
20:40:27 T:1650279392 ERROR: CCurlFile::Open failed with code 0 for https://41-150-17-85.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
20:40:27 T:1633502176 ERROR: CCurlFile::Open failed with code 401 for https://192-168-0-3.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
20:40:28 T:1641890784 ERROR: CCurlFile::FillBuffer - Failed: Couldn’t connect to server(7)
20:40:28 T:1641890784 ERROR: CCurlFile::Open failed with code 0 for https://41-150-17-85.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
20:40:28 T:1633502176 ERROR: CCurlFile::Open failed with code 401 for https://192-168-0-3.88894de2f8284f1e833eefb9d0600374.plex.direct:32400/?X-Plex-Token=SECRETSTUFF
20:41:24 T:1952445408 NOTICE: CAESinkPi:AddPackets Underrun (delay:0.00 frames:2205)
20:41:29 T:1633502176 NOTICE: -->Python Interpreter Initialized<–
20:41:30 T:1962705456 ERROR: Control 1000 in window 13001 has been asked to focus, but it can’t
20:41:30 T:1671414752 WARNING: CPlexFile::BuildHTTPURL tried to lookup server best but it was not found!
20:41:30 T:1671414752 ERROR: GetDirectory - Error getting plexserver://best:32400/library/arts/?sort=random&X-Plex-Container-Start=0&X-Plex-Container-Size=50
20:41:30 T:1747858400 WARNING: CPlexFile::BuildHTTPURL tried to lookup server best but it was not found!
20:41:30 T:1747858400 ERROR: GetDirectory - Error getting plexserver://best:32400/library/arts/?sort=random&X-Plex-Container-Start=0&X-Plex-Container-Size=50
======== /storage/.plexht/temp/dmesg.txt ==============
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.13 (docker@5db96b7a64b6) (gcc version 6.3.0 (GCC) ) #1 Wed Mar 15 01:14:01 UTC 2017
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] OF: fdt:Machine model: Raspberry Pi Model B Rev 2
[ 0.000000] cma: Reserved 8 MiB at 0x12c00000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 79872
[ 0.000000] free_area_init_node: node 0, pgdat 8087aca4, node_mem_map 9352e000
[ 0.000000] Normal zone: 702 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 79872 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 79170
[ 0.000000] Kernel command line: bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img usbcore.autosuspend=-1
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 298928K/319488K available (5119K kernel code, 207K rwdata, 1152K rodata, 2168K init, 362K bss, 12368K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0x94000000 - 0xff800000 (1720 MB)
[ 0.000000] lowmem : 0x80000000 - 0x93800000 ( 312 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x805081f0 (5121 kB)
[ 0.000000] .init : 0x8062a000 - 0x80848000 (2168 kB)
[ 0.000000] .data : 0x80848000 - 0x8087bee0 ( 208 kB)
[ 0.000000] .bss : 0x8087bee0 - 0x808d6a20 ( 363 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.000066] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000146] bcm2835: system timer (irq = 27)
[ 0.000525] Console: colour dummy device 80x30
[ 0.000546] console [tty0] enabled
[ 0.000575] Calibrating delay loop… 697.76 BogoMIPS (lpj=1161216)
[ 0.026925] pid_max: default: 32768 minimum: 301
[ 0.027144] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.027158] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.028033] Disabling cpuset control group subsystem
[ 0.028164] CPU: Testing write buffer coherency: ok
[ 0.028544] Setting up static identity map for 0x8200 - 0x8238
[ 0.030234] devtmpfs: initialized
[ 0.038118] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.038494] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.038520] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.039724] pinctrl core: initialized pinctrl subsystem
[ 0.041166] NET: Registered protocol family 16
[ 0.043431] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.051811] cpuidle: using governor ladder
[ 0.051825] cpuidle: using governor menu
[ 0.052281] Serial: AMBA PL011 UART driver
[ 0.056968] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[ 0.057791] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 0.099658] bcm2835-dma 20007000.dma: DMA legacy API manager at 9400f000, dmachans=0x1
[ 0.102065] SCSI subsystem initialized
[ 0.102523] usbcore: registered new interface driver usbfs
[ 0.102631] usbcore: registered new interface driver hub
[ 0.102789] usbcore: registered new device driver usb
[ 0.104572] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-03-02 15:37
[ 0.106092] clocksource: Switched to clocksource timer
[ 0.124287] NET: Registered protocol family 2
[ 0.125319] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.125404] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.125474] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.125561] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.125587] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.125867] NET: Registered protocol family 1
[ 0.330970] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.347064] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.354804] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.354819] io scheduler noop registered (default)
[ 0.354826] io scheduler deadline registered
[ 0.355145] io scheduler cfq registered
[ 0.361239] BCM2708FB: allocated DMA memory 52d00000
[ 0.361317] BCM2708FB: allocated DMA channel 0 @ 9400f000
[ 0.402212] Console: switching to colour frame buffer device 228x61
[ 0.437316] bcm2835-rng 20104000.rng: hwrng registered
[ 0.437467] vc-cma: Videocore CMA driver
[ 0.437480] vc-cma: vc_cma_base = 0x00000000
[ 0.437489] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 0.437495] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.437851] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 0.462546] brd: module loaded
[ 0.462910] loop: module loaded
[ 0.468237] nbd: registered device at major 43
[ 0.483732] usbcore: registered new interface driver rtsx_usb
[ 0.484500] libphy: Fixed MDIO Bus: probed
[ 0.484512] tun: Universal TUN/TAP device driver, 1.6
[ 0.484516] tun: © 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 0.485106] usbcore: registered new interface driver smsc95xx
[ 0.485175] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.711540] Core Release: 2.80a
[ 0.711553] Setting default values for core params
[ 0.711584] Finished setting default values for core params
[ 0.842761] random: fast init done
[ 0.912117] Using Buffer DMA mode
[ 0.912126] Periodic Transfer Interrupt Enhancement - disabled
[ 0.912130] Multiprocessor Interrupt Enhancement - disabled
[ 0.912139] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.912212] Dedicated Tx FIFOs mode
[ 0.912843] WARN::dwc_otg_hcd_init:1053: FIQ DMA bounce buffers: virt = 0x92d14000 dma = 0x52d14000 len=9024
[ 0.912870] FIQ FSM acceleration enabled for :
[ 0.912870] Non-periodic Split Transactions
[ 0.912870] Periodic Split Transactions
[ 0.912870] High-Speed Isochronous Endpoints
[ 0.912870] Interrupt/Control Split Transaction hack enabled
[ 0.912879] dwc_otg: Microframe scheduler enabled
[ 0.912967] WARN::hcd_init_fiq:459: FIQ on core 0 at 0x8038fc9c
[ 0.912980] WARN::hcd_init_fiq:460: FIQ ASM at 0x8038ff78 length 36
[ 0.913003] WARN::hcd_init_fiq:486: MPHI regs_base at 0x940b3000
[ 0.913067] dwc_otg 20980000.usb: DWC OTG Controller
[ 0.913130] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[ 0.913192] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[ 0.913243] Init: Port Power? op_state=1
[ 0.913248] Init: Power Port (0)
[ 0.913509] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.913527] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.913539] usb usb1: Product: DWC OTG Controller
[ 0.913550] usb usb1: Manufacturer: Linux 4.9.13 dwc_otg_hcd
[ 0.913561] usb usb1: SerialNumber: 20980000.usb
[ 0.914806] hub 1-0:1.0: USB hub found
[ 0.914885] hub 1-0:1.0: 1 port detected
[ 0.915849] dwc_otg: FIQ enabled
[ 0.915859] dwc_otg: NAK holdoff enabled
[ 0.915863] dwc_otg: FIQ split-transaction FSM enabled
[ 0.915886] Module dwc_common_port init
[ 0.916465] usbcore: registered new interface driver usb-storage
[ 0.916926] mousedev: PS/2 mouse device common for all mice
[ 0.917207] i2c /dev entries driver
[ 0.919498] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[ 0.920013] bcm2835-cpufreq: min=700000 max=950000
[ 0.920754] sdhci: Secure Digital Host Controller Interface driver
[ 0.920763] sdhci: Copyright© Pierre Ossman
[ 0.921480] sdhost: log_buf @ 92d13000 (52d13000)
[ 0.972806] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.993228] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.993621] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.993729] hidraw: raw HID events driver © Jiri Kosina
[ 0.995672] usbcore: registered new interface driver usbhid
[ 0.995678] usbhid: USB HID core driver
[ 0.996636] vchiq: vchiq_init_state: slot_zero = 0x92d80000, is_master = 0
[ 0.999729] NET: Registered protocol family 10
[ 1.003220] NET: Registered protocol family 17
[ 1.003286] Key type dns_resolver registered
[ 1.010229] vc-sm: Videocore shared memory driver
[ 1.010247] [vc_sm_connected_init]: start
[ 1.011808] [vc_sm_connected_init]: end - returning 0
[ 1.012049] console [netcon0] enabled
[ 1.012054] netconsole: network logging started
[ 1.012058] of_cfs_init
[ 1.012329] of_cfs_init: OK
[ 1.019412] Freeing unused kernel memory: 2168K (8062a000 - 80848000)
[ 1.019450] This architecture does not have kernel memory protection.
[ 1.053809] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.055897] mmc0: new high speed SDHC card at address 0007
[ 1.066247] mmcblk0: mmc0:0007 SD16G 14.5 GiB
[ 1.068221] mmcblk0: p1 p2
[ 1.122993] Indeed it is in host mode hprt0 = 00021501
[ 1.356728] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.356884] Indeed it is in host mode hprt0 = 00001101
[ 1.546504] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 1.546518] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.548782] hub 1-1:1.0: USB hub found
[ 1.548903] hub 1-1:1.0: 3 ports detected
[ 1.829461] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.919751] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 1.919766] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.922729] smsc95xx v1.0.5
[ 1.977070] smsc95xx 1-1.1:1.0 eth0: register ‘smsc95xx’ at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:1c:ce:57
[ 2.049479] usb 1-1.3: new low-speed USB device number 4 using dwc_otg
[ 2.180036] usb 1-1.3: New USB device found, idVendor=1997, idProduct=1221
[ 2.180050] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.180058] usb 1-1.3: Product: Wireless Air mouse Keyboard
[ 2.180065] usb 1-1.3: Manufacturer:
[ 2.197925] input: Wireless Air mouse Keyboard as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:1997:1221.0001/input/input0
[ 2.254059] hid-generic 0003:1997:1221.0001: input,hidraw0: USB HID v1.00 Keyboard [ Wireless Air mouse Keyboard] on usb-20980000.usb-1.3/input0
[ 2.281529] input: Wireless Air mouse Keyboard as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:1997:1221.0002/input/input1
[ 2.336879] hid-generic 0003:1997:1221.0002: input,hidraw1: USB HID v1.00 Mouse [ Wireless Air mouse Keyboard] on usb-20980000.usb-1.3/input1
[ 4.819470] EXT4-fs (mmcblk0p2): couldn’t mount as ext3 due to feature incompatibilities
[ 4.820265] EXT4-fs (mmcblk0p2): couldn’t mount as ext2 due to feature incompatibilities
[ 4.891403] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.504813] systemd[1]: System time before build time, advancing clock.
[ 5.538809] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 5.539633] systemd[1]: Detected architecture arm.
[ 5.540081] systemd[1]: Set hostname to .
[ 5.763858] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.764728] systemd[1]: Listening on udev Kernel Socket.
[ 5.765356] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.766018] systemd[1]: Listening on Journal Socket.
[ 5.766706] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.769568] systemd[1]: Created slice User and Session Slice.
[ 5.770185] systemd[1]: Listening on udev Control Socket.
[ 7.226911] systemd-journald[176]: Received request to flush runtime journal from PID 1
[ 8.546500] random: crng init done
[ 11.756359] lirc_dev: IR Remote Control driver registered, major 244
[ 11.772362] lirc_rpi: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.821563] Console: switching to colour dummy device 80x30
[ 12.083959] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
[ 12.772855] lirc_rpi: auto-detected active high receiver on GPIO pin 18
[ 12.773207] lirc_rpi lirc_rpi: lirc_dev: driver lirc_rpi registered at minor = 0
[ 12.773215] lirc_rpi: driver registered!
[ 15.865224] smsc95xx 1-1.1:1.0 eth0: hardware isn’t capable of remote wakeup
[ 16.042943] 8021q: 802.1Q VLAN Support v1.8
[ 17.421231] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 17.761600] input: lircd-uinput as /devices/virtual/input/input2
[ 17.882702] input: eventlircd as /devices/virtual/input/input3
[/code]
RasPlex looks cool.
So my question, why plex? Isn’t it a paid app vs Kodi which is free?
I know that plex was a partial fork from xbmc ages ago.
I’ve been using Kodi for years and would love to know more about and why “you” chose plex ? Why not Kodi?
Ps. On Kodi Krypton they really improved the web interface and can now buffer via the browser 